|
Timber Mouldings - Product Information:
Craftwood MDF Mouldings - Primed
All MDF (Medium Density Fibreboard) used in the manufacture of our products is made to Australian Standards and the board is MR (Moisture Resistant). In the production process all profiles after having been machined, proceed through a profile sander and then go through the paint line for priming.
All Craftwood products are proudly Australian made.
The following profiles are available in Craftwood MDF Mouldings - Primed
ULTRAprime MDF Mouldings - Primed
All MDF (Medium Density Fibreboard) used in the manufacture of our products is made to Australian Standards and the board is MR (Moisture Resistant). In the production process all profiles after having been machined, proceed through a profile sander and then go through the paint line for priming.
A NEW standard for ULTRA performance....
The NEW range of ULTRAprime Mouldings is set to raise the standard for performance qualities of all moulding products sold in Australia. Pre primed in a light green, you can easily identify quality and performace at a glance. ULTRAprime Mouldings are made to suit Australia's specific needs and are manufactured here in Australia to meet Australian standards for Moisture Resistance and EO formaldehyde levels. ULTRAprime can ensure you maximum performance every time with:
ULTRA moisture resistance - Manufactured to the highest Australian Standards for moisture resistance
ULTRA ease and speed of installation - new green primer improves paint coverage, gloss and smoothness of finish
ULTRA low formaldehyde levels - meets new Australian EO (zero) standards
ULTRA choice - over 40 profiles
ULTRA Australian - Quality Australian made products that you can count on
The following profiles are available in ULTRAprime MDF Mouldings - Primed
Finger Jointed Pine Mouldings - Primed
A finger joint is a joint where the lines resemble interlocking fingers. All our finger jointed radiata pine mouldings are a clear grade manufactured in Australia and New Zealand. Finger jointed radiata pine is less likely to twist than a natural piece of pine. This range of products have been through a paint line for priming.
The following profiles are available in Finger Jointed Pine Mouldings - Primed
Finger Jointed Pine Mouldings - Unprimed
A finger joint is a joint where the lines resemble interlocking fingers. All our finger jointed radiata pine mouldings are a clear grade manufactured in Australia and New Zealand. Finger jointed radiata pine is less likely to twist than a natural piece of pine.
The following profiles are available in Finger Jointed Pine Mouldings - Unprimed
Finger Jointed Treated Pine - Primed
A finger joint is a joint where the lines resemble interlocking fingers. All our finger jointed radiata pine mouldings are a clear grade of pine manufactured in Australia and New Zealand. Finger jointed radiata pine is less likely to twist than a piece of natural pine.
Protim Optimum (Azole - An organic formulation) protects and preserves timber presisely. Protim fluid is a clear formulation. It does not change the natural colouring of the wood. It can be painted, glued or sealed with most commercially available products. Protim Optimum meets the requirements for H3 market (ie. above ground use) as fungicide / insecticide. AUST STD (AS1604) NZ STD (MP 3640)
The following profiles are available in Finger Jointed Treated Pine - Primed
Tasmanian Oak Mouldings - Select Grade
Tasmania Oak is a clear, straight grain timber and its colour range is light from straw to reddish brown with intermediate shades of cream to pink. Tasmanian Oak is naturally hard and tough. We use select grade Tasmanian Oak in all our range of mouldings except for our Colonial range which is in Standard Grade.
The following profiles are available in Tasmanian Oak Mouldings - Select Grade
Terminology or words that could be used when looking for products on our site.
Moldings
Arcs
Skirts
Federation
Californian Bungalow
Renovations
Hand rail
Wholesale Timber
Timber Wholesale | 
